Pioneer TS-W12PRS

A subwoofer that can handle real power and equipped with the Voice Coil Cooling System (VCCS), which together with a giant magnetic circuit, draws heat away from the inside of the sub, so that the sound stays natural and your subwoofer keeps its cool. There's also a 3� (76 cm) dual layer long voice coil (2 x 4 ohm) that, combined with the extremely light Aramid Fibre Composite Cone, results in a very strong moving force.


Features of the Pioneer TS-W12PRS include:

  • Short description - C-Type Subwoofer
  • Frequency response - 15 - 2.000 Hz
  • Sensitivity (1W/1m) - 92 dB
  • Qts - 0,39
  • Recommended sealed enclosure (Litres) - 28
  • Lowest resonance frequency (FS) - 24 Hz
  • Maximum Power - 1.200 Watt
  • Nominal input power - 300 Watt
  • Vas - 93
  • Woofer size (cm) - 30 cm
  • Woofer material - Aramid Fibre Composite cone woofer
  • Dual 4-ohm voice coils: 2 or 8 ohm
  • Front VCCS (Voice Coil Cooling System)
  • Terminals - Gold-plated

Pioneer TS-W121SPL

Loads of decibels combined with solid power make the TS-W121SPL a force to be reckoned with. This high-quality subwoofer weighs in at +165 dB with a thumping 2000 W maximum power output.

Borrowing some of the innovative ideas from its older brother, the TS-W5000SPL, this 30 cm subwoofer features a Glass fibre/Carbon fibre reinforced IMPP cone and a die-cast aluminium basket. With all of this and more, the TS-W121SPL has what it takes for your next SPL competition, or perhaps your next trip around the block!

Features of the Pioneer TS-W121SPL include:

  • Short description - SPL C-Type Subwoofer
  • Interlaced Glass Fibre/Carbon Fibre Reinforced IMPP cone
  • Wide-roll, 3-layer fibre woven radial surround
  • Double-stacked high power magnets
  • Silver binding post terminal
  • Aluminium die-cast basket with bottom hold structure
  • Extended and vented pole yoke
  • Dual 4 ohm voice coils (2 or 8 ohm)
  • Optional accessories:
  • UD-G305 spoke grille
  • UD-W300S custom enclosure box
  • Enclosure use
  • Frequency response - 18 - 2.000 Hz
  • Sensitivity (1W/1m) - 89 dB
  • Qts - 0.328
  • Recommended sealed enclosure (Litres) - 42.5
  • Lowest resonance frequency (FS) - 32 Hz
  • Maximum Power - 2.000 Watt
  • Nominal input power - 750 Watt
  • Vas - 34.53 l
  • Woofer size (cm) - 30 cm
  • Dual 4-ohm voice coils: 2 or 8 ohm

Pioneer TS-W101SPL

A big fan of SPL? Then the TS-W101SPL may be your winning ticket. The high SPL capability � up to 165 dB � will charge your system with intense power and maximum force. Power output checks in at a heady 1500 W. Based on the same technology found in the TS-W5000SPL competition model, this subwoofer is filled with quality material including a wide-roll, 3-layer fibre woven radial surround. Get ready to rock the block!



Features of the Pioneer TS-W101SPL include:

  • SPL C-Type Subwoofer
  • Interlaced Glass Fibre/Carbon Fibre Reinforced IMPP cone
  • Wide-roll, 3-layer fibre woven radial surround
  • Double-stacked high power magnets
  • Silver binding post terminal
  • Aluminium die-cast basket with bottom hold structure
  • Extended and vented pole yoke
  • Dual 4 ohm voice coils (2 or 8 ohm)
  • Optional accessories:
  • UD-G255 spoke grille
  • UD-W250S custom enclosure box
  • Enclosure use
  • Frequency response - 18 - 2.500 Hz
  • Sensitivity (1W/1m) - 87 dB
  • Qts - 0.376
  • Recommended sealed enclosure (Litres) - 28.3
  • Lowest resonance frequency (FS) - 37 Hz
  • Maximum Power - 1.500 Watt
  • Nominal input power - 600 Watt
  • Vas - 17.54 l
  • Woofer size (cm) - 25 cm
  • Dual 4-ohm voice coils:- 2 or 8 ohm

Pioneer TS-SW841D








Features of the Pioneer TS-SW841D include:

  • Interlaced Ultra Long Glass Fibre reinforced IMPP™ drive cone
  • 3-layer fibre woven radial surround
  • Double cone reinforcement nodes
  • Damper-less, Air suspension excursion control system
  • Aluminium centre cap
  • Bottom-hold design aluminium die-cast chassis with fin shape design
  • Spring compression binding post terminal
  • 4 ohm voice coil
  • Frequency response - 30 - 1.500 Hz
  • Sensitivity (1W/1m) - 85 dB
  • Maximum Power - 500 Watt
  • Nominal input power - 120 Watt
  • Woofer size (cm) - 20 cm
  • Woofer material - Interlaced Glass/Carbon Fibre reinforced IMPP™ upper cone

Pioneer TS-SW124D

Slim and compact are not typical words associated with a subwoofer, but they perfectly describe the TS-SW124D. Only 8.3 cm deep, it revolutionises the very concepts of installation and application. For example, its recommended sealed enclosure is a mere 22.6 litre, the smallest of any Pioneer subwoofer currently available. It combines top technologies - the Interlaced Carbon/KEVLAR® brand Fibre Reinforced IMPP double cone - with the revolutionary space-saving concept, the Damper-less, Air suspension system. This innovative two-cone system creates an airtight space that reduces air pressure tension inside the subwoofer for clear, pure sound. A top-quality performer in a compact package, this subwoofer is sure to appeal to customers demanding design and installation flexibility along with their high power performance.

Features of the Pioneer TS-SW124D include:

  • Shallow-Type Subwoofer
  • Interlaced Carbon/KEVLAR® brand Fibre Reinforced IMPP double cone
  • 3-layer fibre woven radial surround
  • Double cone reinforcement nodes
  • Damper-less, Air suspension excursion control system
  • Aluminium die-cast one-piece rigid chassis
  • Silver binding post terminal
  • Extended, vented and projected T-pole-type yoke
  • 4 ohm voice coil
  • Enclosure use
  • Frequency response - 18 - 1,000 Hz
  • Sensitivity (1W/1m) - 88 dB
  • Qts - 0.55
  • Recommended sealed enclosure (Litres) - 22.64
  • Lowest resonance frequency (FS) - 31.7 Hz
  • Maximum Power - 1.200 Watt
  • Nominal input power - 300 Watt
  • Vas - 28.05 Litres
  • Woofer size (cm) - 30 cm

Pioneer TS-SW1241D













Features of the Pioneer TS-SW1241D include:
  • Interlaced Ultra Long Glass Fibre reinforced IMPP™ drive cone
  • 3-layer fibre woven radial surround
  • Double cone reinforcement nodes
  • Damper-less, Air suspension excursion control system
  • Aluminium centre cap
  • Bottom-hold design aluminium die-cast chassis with fin shape design
  • Spring compression binding post terminal
  • 4 ohm voice coil
  • Frequency response - 18 - 1.000 Hz
  • Sensitivity (1W/1m) - 88 dB
  • Maximum Power - 1.400 Watt
  • Nominal input power - 350 Watt
  • Woofer size (cm) - 30 cm
  • Woofer material - Interlaced Glass/Carbon Fibre reinforced IMPP™ upper cone